717.336.2949

M-F from 7:30am to 5:00pm

717.354.6141

M-F from 7:00am to 5:00pm

My Cart

/Products/Electric Motors/Single Phase/WEG/Rolled Steel, TEFC/C-Face, Foot Mount/00218ES1B145TC-S WEG 2HP Electric Motor, 1800RPM

Product ID: 00218ES1B145TC-S

00218ES1B145TC-S WEG 2HP Electric Motor, 1800RPM

MFG: WEG Electric Corporation
MFG Part Number: 00218ES1B145TC-S

Selected accessories will also be added to cart

$482.25 / Each

Quantity:

IC411 - TEFC, IP55, 143TC/145TC Frame, 115/208-230V Single Phase 60Hz, Rigid Base, C-Face, 13817197, Rolled Steel, 7/8" Keyed Shaft

Details
Purchase Components

The W01 motor is the perfect option for applications that require robustness, low weight and high performance in a single product. The W01 Rolled Steel Single Phase motor has good thermal performance and easy installation and maintenance. Because of their high starting torque, they are particularly well-suited for heavy starting loads.

Product features

Standard	NEMA MG-1
Frequency	60 Hz
Voltage	115/208-230 V
Number of poles	4
Degree of Protection	IP55
Synchronous speed	1800 rpm

Output rating	2 HP
Mounting	Foot-mounted
Flange	C
Mounting	F-1
Terminal box¹	Left position
Enclosure	IC411 - TEFC

Electric Motors

Frame	143/5TC
Output	2 HP (1.5 kW)
Number of Poles	4
Frequency	60 Hz
Rated speed	1745 rpm
Slip	3.06 %
Rated voltage	115/208-230 V
Rated current	20.0/11.1-10.0 A
L. R. Amperes	160/88.8-80.0 A
LRC	8.0x(Code L)
No load current	12.2/5.26-6.10 A
Rated torque	5.94 ft.lb
Locked rotor torque	260 %
Breakdown torque	260 %
Locked rotor time	10s (cold) 6s (hot)

Moment of inertia (J)	0.1614 sq.ft.lb
Design	L
Insulation Class	F
Temperature rise	80 K
Service factor	1.15 (1.00 @ 208V)
Duty Cycle	Cont.(S1)
Starting Method	Direct On Line
Ambient temperature	-20°C to +40°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP55
Enclosure	IC411 - TEFC
Mounting	F-1
Rotation¹	Both (CW and CCW)
Noise level²	54.0 dB(A)
Approx. weight³	50.9 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
70.0	76.0	78.5

Power factor

50%	75%	100%
0.66	0.76	0.82

Features

Frame Material	Rolled Steel
Impregnation Method	Dip and Bake Polyester
Main terminal box hole	1.118"
Terminal Block	Without
Drain	Rubber, automatic
Shaft Material	SAE 1040/45 Carbon Steel
Painting	Munsell N 1 - Matte 207N (ISO 12944 - C2)
Grounding Lugs	Single
Fan Cover material	Plastic
Tropicalized Painting	Without
Fan material	Plastic
Bearing cap	Yes- Bearing Cap
Bolt Material	Carbon Steel
Balancing Method	1/2 Key
Drip Cover	Without
Resilient Base	Without