Motor/Control Division

Frame	284/6TS
Output	40 HP (30 kW)
Number of Poles	2
Frequency	50 Hz
Rated speed	2932 rpm
Slip	2.27 %
Rated voltage	380 V
Rated current	56.5 A
L. R. Amperes	333 A
LRC	5.9x(Code F)
No load current	14.3 A
Rated torque	71.6 ft.lb
Locked rotor torque	220 %
Breakdown torque	200 %
Locked rotor time	37s (cold) 21s (hot)

Moment of inertia (J)	2.25 sq.ft.lb
Design	B
Insulation Class	F
Service factor	1.15
Temperature rise	80 K
Duty Cycle	Cont.(S1)
Starting Method	Direct On Line
Ambient temperature	-20?C to +50?C
Altitude	1000 m.a.s.l.
Degree of Protection	IP23
Enclosure	IC01 - ODP
Mounting	F-1
Rotation?	Both (CW and CCW)
Noise level?	73.0 dB(A)
Approx. weight?	368 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
91.5	91.7	91.7

Power factor

50%	75%	100%
0.80	0.86	0.88

Frame	284/6TS
Output	40 HP (30 kW)
Number of Poles	2
Frequency	50 Hz
Rated speed	2940 rpm
Slip	2.00 %
Rated voltage	400 V
Rated current	54.3 A
L. R. Amperes	348 A
LRC	6.4x(Code G)
No load current	16.0 A
Rated torque	71.4 ft.lb
Locked rotor torque	240 %
Breakdown torque	220 %
Locked rotor time	34s (cold) 19s (hot)

Moment of inertia (J)	2.25 sq.ft.lb
Design	B
Insulation Class	F
Service factor	1.15
Temperature rise	80 K
Duty Cycle	Cont.(S1)
Starting Method	Direct On Line
Ambient temperature	-20?C to +50?C
Altitude	1000 m.a.s.l.
Degree of Protection	IP23
Enclosure	IC01 - ODP
Mounting	F-1
Rotation?	Both (CW and CCW)
Noise level?	73.0 dB(A)
Approx. weight?	368 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
91.5	91.7	91.7

Power factor

50%	75%	100%
0.76	0.84	0.87

Frame	284/6TS
Output	40 HP (30 kW)
Number of Poles	2
Frequency	50 Hz
Rated speed	2945 rpm
Slip	1.83 %
Rated voltage	415 V
Rated current	52.5 A
L. R. Amperes	352 A
LRC	6.7x(Code H)
No load current	17.0 A
Rated torque	71.3 ft.lb
Locked rotor torque	260 %
Breakdown torque	250 %
Locked rotor time	32s (cold) 18s (hot)

Moment of inertia (J)	2.25 sq.ft.lb
Design	B
Insulation Class	F
Service factor	1.15
Temperature rise	80 K
Duty Cycle	Cont.(S1)
Starting Method	Direct On Line
Ambient temperature	-20?C to +50?C
Altitude	1000 m.a.s.l.
Degree of Protection	IP23
Enclosure	IC01 - ODP
Mounting	F-1
Rotation?	Both (CW and CCW)
Noise level?	73.0 dB(A)
Approx. weight?	368 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
92.3	92.4	92.4

Power factor

50%	75%	100%
0.74	0.82	0.86

Features

Frame Material	Cast Iron
Impregnation Method	Dip and Bake Polyester
Regreasing System	At Drive end and Non-drive end
Main terminal box hole	NPT 1 1/2"
Terminal Block	Without
Shaft Locking Device	Without
Shaft Material	SAE 1040/45 Carbon Steel
Painting	RAL 3002 203A (ISO 12944 - C2)
Grounding Lugs	Single
Fan Cover material	Without Fan Cover
Tropicalized Painting	Without
Fan material	Without fan
Bearing cap	No-Without Bearing Cap
Bolt Material	Carbon Steel
Balancing Method	1/2 Key
Drip Cover	Without
Overload protector (phenolic)	Without overload protector
Connection Cables Quantity	6