Motor/Control Division

Frame	225S/M
Output	60 HP (45 kW)
Number of Poles	2
Frequency	50 Hz
Rated speed	2965 rpm
Slip	1.17 %
Rated voltage	380 V
Rated current	80.1 A
L. R. Amperes	641 A
LRC	8.0
No load current	18.8 A
Rated torque	105 ft.lb
Locked rotor torque	210 %
Breakdown torque	290 %
Locked rotor time	21s (cold) 12s (hot)

Moment of inertia (J)	10.5 sq.ft.lb
Design	N
Insulation Class	F
Service factor	1.00
Temperature rise	80 K
Duty Cycle	S1
Starting Method	Direct On Line
Ambient temperature	-20Â°C to +40Â°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP55
Enclosure	IC411 - TEFC
Mounting	B3L(E)
RotationÂ¹	Both (CW and CCW)
Noise levelÂ²	74.0 dB(A)
Approx. weightÂ³	945 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
94.6	94.9	94.8

Power factor

50%	75%	100%
0.79	0.86	0.90

Frame	225S/M
Output	60 HP (45 kW)
Number of Poles	2
Frequency	50 Hz
Rated speed	2970 rpm
Slip	1.00 %
Rated voltage	400 V
Rated current	76.7 A
L. R. Amperes	614 A
LRC	8.0
No load current	20.0 A
Rated torque	105 ft.lb
Locked rotor torque	240 %
Breakdown torque	320 %
Locked rotor time	21s (cold) 12s (hot)

Moment of inertia (J)	10.5 sq.ft.lb
Design	N
Insulation Class	F
Service factor	1.00
Temperature rise	80 K
Duty Cycle	S1
Starting Method	Direct On Line
Ambient temperature	-20Â°C to +40Â°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP55
Enclosure	IC411 - TEFC
Mounting	B3L(E)
RotationÂ¹	Both (CW and CCW)
Noise levelÂ²	74.0 dB(A)
Approx. weightÂ³	945 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
94.6	95.1	95.1

Power factor

50%	75%	100%
0.77	0.85	0.89

Frame	225S/M
Output	60 HP (45 kW)
Number of Poles	2
Frequency	50 Hz
Rated speed	2970 rpm
Slip	1.00 %
Rated voltage	415 V
Rated current	74.6 A
L. R. Amperes	597 A
LRC	8.0
No load current	21.0 A
Rated torque	105 ft.lb
Locked rotor torque	260 %
Breakdown torque	340 %
Locked rotor time	21s (cold) 12s (hot)

Moment of inertia (J)	10.5 sq.ft.lb
Design	N
Insulation Class	F
Service factor	1.00
Temperature rise	80 K
Duty Cycle	S1
Starting Method	Direct On Line
Ambient temperature	-20Â°C to +40Â°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP55
Enclosure	IC411 - TEFC
Mounting	B3L(E)
RotationÂ¹	Both (CW and CCW)
Noise levelÂ²	74.0 dB(A)
Approx. weightÂ³	945 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
94.5	95.2	95.3

Power factor

50%	75%	100%
0.75	0.84	0.88

Frame	225S/M
Output	60 HP (45 kW)
Number of Poles	2
Frequency	60 Hz
Rated speed	3565 rpm
Slip	0.97 %
Rated voltage	460 V
Rated current	66.7 A
L. R. Amperes	520 A
LRC	7.8
No load current	17.5 A
Rated torque	87.2 ft.lb
Locked rotor torque	240 %
Breakdown torque	340 %
Locked rotor time	52s (cold) 29s (hot)

Moment of inertia (J)	10.5 sq.ft.lb
Design	N
Insulation Class	F
Service factor	1.25
Temperature rise	80 K
Duty Cycle	S1
Starting Method	Direct On Line
Ambient temperature	-20Â°C to +40Â°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP55
Enclosure	IC411 - TEFC
Mounting	B3L(E)
RotationÂ¹	Both (CW and CCW)
Noise levelÂ²	79.0 dB(A)
Approx. weightÂ³	945 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
93.0	94.1	94.1

Power factor

50%	75%	100%
0.80	0.87	0.90

Features

Frame Material	Cast Iron
Impregnation Method	Constant Resin Flow
Regreasing System	At Drive end and Non-drive end
Main terminal box hole	2xM50x1,5
Terminal Block	BMC - 6 pins
Shaft Locking Device	Without
Drain	Rubber, automatic
Shaft Material	SAE 1040/45 Carbon Steel
Painting	RAL 5009 203A (ISO 12944 - C2)
Grounding Lugs	Double
Fan Cover material	Cast Iron
Tropicalized Painting	Without
Fan material	Plastic
Bearing cap	Yes- Bearing Cap
Balancing Method	1/2 Key
Drip Cover	Without
Overload protector (phenolic)	Without overload protector