Motor/Control Division

Frame	315S/M
Output	150 HP (110 kW)
Number of Poles	2
Frequency	50 Hz
Rated speed	2980 rpm
Slip	0.67 %
Rated voltage	380 V
Rated current	193 A
L. R. Amperes	1467 A
LRC	7.6
No load current	47.0 A
Rated torque	261 ft.lb
Locked rotor torque	190 %
Breakdown torque	270 %
Locked rotor time	54s (cold) 30s (hot)

Moment of inertia (J)	50.2 sq.ft.lb
Design	N
Insulation Class	F
Service factor	1.00
Temperature rise	80 K
Duty Cycle	S1
Starting Method	Direct On Line
Ambient temperature	-20Â°C to +40Â°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP55
Enclosure	IC411 - TEFC
Mounting	B3L(E)
RotationÂ¹	Both (CW and CCW)
Noise levelÂ²	77.0 dB(A)
Approx. weightÂ³	2296 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
94.1	95.7	96.0

Power factor

50%	75%	100%
0.83	0.89	0.90

Frame	315S/M
Output	150 HP (110 kW)
Number of Poles	2
Frequency	50 Hz
Rated speed	2980 rpm
Slip	0.67 %
Rated voltage	400 V
Rated current	186 A
L. R. Amperes	1562 A
LRC	8.4
No load current	50.0 A
Rated torque	261 ft.lb
Locked rotor torque	210 %
Breakdown torque	300 %
Locked rotor time	54s (cold) 30s (hot)

Moment of inertia (J)	50.2 sq.ft.lb
Design	N
Insulation Class	F
Service factor	1.00
Temperature rise	80 K
Duty Cycle	S1
Starting Method	Direct On Line
Ambient temperature	-20Â°C to +40Â°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP55
Enclosure	IC411 - TEFC
Mounting	B3L(E)
RotationÂ¹	Both (CW and CCW)
Noise levelÂ²	77.0 dB(A)
Approx. weightÂ³	2296 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
94.1	95.7	96.1

Power factor

50%	75%	100%
0.80	0.87	0.89

Frame	315S/M
Output	150 HP (110 kW)
Number of Poles	2
Frequency	50 Hz
Rated speed	2980 rpm
Slip	0.67 %
Rated voltage	415 V
Rated current	181 A
L. R. Amperes	1629 A
LRC	9.0
No load current	54.0 A
Rated torque	261 ft.lb
Locked rotor torque	229 %
Breakdown torque	320 %
Locked rotor time	54s (cold) 30s (hot)

Moment of inertia (J)	50.2 sq.ft.lb
Design	N
Insulation Class	F
Service factor	1.00
Temperature rise	80 K
Duty Cycle	S1
Starting Method	Direct On Line
Ambient temperature	-20Â°C to +40Â°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP55
Enclosure	IC411 - TEFC
Mounting	B3L(E)
RotationÂ¹	Both (CW and CCW)
Noise levelÂ²	77.0 dB(A)
Approx. weightÂ³	2296 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
94.6	95.7	96.1

Power factor

50%	75%	100%
0.78	0.86	0.88

Frame	315S/M
Output	150 HP (110 kW)
Number of Poles	2
Frequency	60 Hz
Rated speed	3585 rpm
Slip	0.42 %
Rated voltage	460 V
Rated current	163 A
L. R. Amperes	1516 A
LRC	9.3
No load current	48.0 A
Rated torque	217 ft.lb
Locked rotor torque	250 %
Breakdown torque	370 %
Locked rotor time	106s (cold) 59s (hot)

Moment of inertia (J)	50.2 sq.ft.lb
Design	N
Insulation Class	F
Service factor	1.25
Temperature rise	80 K
Duty Cycle	S1
Starting Method	Direct On Line
Ambient temperature	-20Â°C to +40Â°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP55
Enclosure	IC411 - TEFC
Mounting	B3L(E)
RotationÂ¹	Both (CW and CCW)
Noise levelÂ²	81.0 dB(A)
Approx. weightÂ³	2296 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
92.4	94.1	95.0

Power factor

50%	75%	100%
0.78	0.86	0.89

Features

Frame Material	Cast Iron
Impregnation Method	Constant Resin Flow
Regreasing System	At Drive end and Non-drive end
Main terminal box hole	2xM63x1,5
Terminal Block	BMC - 6 pins
Shaft Locking Device	Without
Drain	Rubber, automatic
Shaft Material	SAE 1040/45 Carbon Steel
Painting	RAL 5009 203A (ISO 12944 - C2)
Grounding Lugs	Double
Fan Cover material	Cast Iron
Tropicalized Painting	Without
Fan material	Plastic
Bearing cap	Yes- Bearing Cap
Balancing Method	1/2 Key
Drip Cover	Without
Overload protector (phenolic)	Without overload protector