Motor/Control Division

Frame	80
Output	1 HP (0.75 kW)
Number of Poles	2
Frequency	50 Hz
Rated speed	2840 rpm
Slip	5.33 %
Rated voltage	220/380 V
Rated current	2.94/1.70 A
L. R. Amperes	22.0/12.8 A
LRC	7.5
No load current	1.43/0.830 A
Rated torque	1.82 ft.lb
Locked rotor torque	360 %
Breakdown torque	330 %
Locked rotor time	45s (cold) 25s (hot)

Moment of inertia (J)	0.0180 sq.ft.lb
Design	N
Insulation Class	F
Service factor	1.00
Temperature rise	80 K
Duty Cycle	S1
Starting Method	Direct On Line
Ambient temperature	-20Â°C to +40Â°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP55
Enclosure	IC411 - TEFC
Mounting	B3L(E)
RotationÂ¹	Both (CW and CCW)
Noise levelÂ²	59.0 dB(A)
Approx. weightÂ³	26.0 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
75.5	82.2	81.6

Power factor

50%	75%	100%
0.66	0.77	0.82

Frame	80
Output	1 HP (0.75 kW)
Number of Poles	2
Frequency	50 Hz
Rated speed	2850 rpm
Slip	5.00 %
Rated voltage	230/400 V
Rated current	2.87/1.65 A
L. R. Amperes	21.5/12.4 A
LRC	7.5
No load current	1.63/0.940 A
Rated torque	1.82 ft.lb
Locked rotor torque	409 %
Breakdown torque	380 %
Locked rotor time	45s (cold) 25s (hot)

Moment of inertia (J)	0.0180 sq.ft.lb
Design	N
Insulation Class	F
Service factor	1.00
Temperature rise	80 K
Duty Cycle	S1
Starting Method	Direct On Line
Ambient temperature	-20Â°C to +40Â°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP55
Enclosure	IC411 - TEFC
Mounting	B3L(E)
RotationÂ¹	Both (CW and CCW)
Noise levelÂ²	59.0 dB(A)
Approx. weightÂ³	26.0 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
75.5	82.0	82.0

Power factor

50%	75%	100%
0.61	0.73	0.80

Frame	80
Output	1 HP (0.75 kW)
Number of Poles	2
Frequency	50 Hz
Rated speed	2860 rpm
Slip	4.67 %
Rated voltage	240/415 V
Rated current	2.85/1.65 A
L. R. Amperes	21.7/12.5 A
LRC	7.6
No load current	1.82/1.05 A
Rated torque	1.81 ft.lb
Locked rotor torque	440 %
Breakdown torque	409 %
Locked rotor time	45s (cold) 25s (hot)

Moment of inertia (J)	0.0180 sq.ft.lb
Design	N
Insulation Class	F
Service factor	1.00
Temperature rise	80 K
Duty Cycle	S1
Starting Method	Direct On Line
Ambient temperature	-20Â°C to +40Â°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP55
Enclosure	IC411 - TEFC
Mounting	B3L(E)
RotationÂ¹	Both (CW and CCW)
Noise levelÂ²	59.0 dB(A)
Approx. weightÂ³	26.0 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
75.5	81.7	82.1

Power factor

50%	75%	100%
0.57	0.70	0.77

Frame	80
Output	1 HP (0.75 kW)
Number of Poles	2
Frequency	60 Hz
Rated speed	3470 rpm
Slip	3.61 %
Rated voltage	460 V
Rated current	1.46 A
L. R. Amperes	12.6 A
LRC	8.6
No load current	0.850 A
Rated torque	1.49 ft.lb
Locked rotor torque	490 %
Breakdown torque	450 %
Locked rotor time	57s (cold) 32s (hot)

Moment of inertia (J)	0.0180 sq.ft.lb
Design	N
Insulation Class	F
Service factor	1.25
Temperature rise	80 K
Duty Cycle	S1
Starting Method	Direct On Line
Ambient temperature	-20Â°C to +40Â°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP55
Enclosure	IC411 - TEFC
Mounting	B3L(E)
RotationÂ¹	Both (CW and CCW)
Noise levelÂ²	62.0 dB(A)
Approx. weightÂ³	26.0 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
75.5	80.0	81.5

Power factor

50%	75%	100%
0.59	0.72	0.79

Features

Frame Material	Aluminum
Impregnation Method	Dip and Bake Polyester
Main terminal box hole	2xM20x1,5
Terminal Block	BMC - 6 pins
Shaft Locking Device	Without
Drain	Rubber, automatic
Shaft Material	SAE 1040/45 Carbon Steel
Painting	RAL 5009 207A (ISO 12944 - C2)
Grounding Lugs	Single
Fan Cover material	Steel
Tropicalized Painting	Without
Fan material	Plastic
Bearing cap	No-Without Bearing Cap
Balancing Method	Not Balanced
Drip Cover	Without