Motor/Control Division

Frame	90S/L
Output	0.75 kW
Number of Poles	4
Frequency	50 Hz
Rated speed	1440 rpm
Slip	4.00 %
Rated voltage	220/380 V
Rated current	3.06/1.77 A
L. R. Amperes	18.0/10.4 A
LRC	5.9
No load current	1.63/0.946 A
Rated torque	3.67 ft.lb
Locked rotor torque	190 %
Breakdown torque	229 %
Locked rotor time	34s (cold) 19s (hot)

Moment of inertia (J)	0.0911 sq.ft.lb
Design	N
Insulation Class	F
Service factor	1.00
Temperature rise	80 K
Duty Cycle	S1
Starting Method	Direct On Line
Ambient temperature	-20Â°C to +40Â°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP56
Enclosure	IC411 - TEFC
Mounting	B3T
RotationÂ¹	Both (CW and CCW)
Noise levelÂ²	49.0 dB(A)
Approx. weightÂ³	86.6 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
79.1	79.9	79.6

Power factor

50%	75%	100%
0.62	0.73	0.81

Frame	90S/L
Output	0.75 kW
Number of Poles	4
Frequency	50 Hz
Rated speed	1445 rpm
Slip	3.67 %
Rated voltage	230/400 V
Rated current	3.01/1.73 A
L. R. Amperes	18.7/10.7 A
LRC	6.2
No load current	1.86/1.07 A
Rated torque	3.66 ft.lb
Locked rotor torque	220 %
Breakdown torque	260 %
Locked rotor time	34s (cold) 19s (hot)

Moment of inertia (J)	0.0911 sq.ft.lb
Design	N
Insulation Class	F
Service factor	1.00
Temperature rise	80 K
Duty Cycle	S1
Starting Method	Direct On Line
Ambient temperature	-20Â°C to +40Â°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP56
Enclosure	IC411 - TEFC
Mounting	B3T
RotationÂ¹	Both (CW and CCW)
Noise levelÂ²	49.0 dB(A)
Approx. weightÂ³	86.6 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
78.0	80.0	80.0

Power factor

50%	75%	100%
0.59	0.70	0.78

Frame	90S/L
Output	0.75 kW
Number of Poles	4
Frequency	50 Hz
Rated speed	1450 rpm
Slip	3.33 %
Rated voltage	240/415 V
Rated current	2.99/1.73 A
L. R. Amperes	19.4/11.2 A
LRC	6.5
No load current	2.00/1.16 A
Rated torque	3.65 ft.lb
Locked rotor torque	229 %
Breakdown torque	280 %
Locked rotor time	34s (cold) 19s (hot)

Moment of inertia (J)	0.0911 sq.ft.lb
Design	N
Insulation Class	F
Service factor	1.00
Temperature rise	80 K
Duty Cycle	S1
Starting Method	Direct On Line
Ambient temperature	-20Â°C to +40Â°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP56
Enclosure	IC411 - TEFC
Mounting	B3T
RotationÂ¹	Both (CW and CCW)
Noise levelÂ²	49.0 dB(A)
Approx. weightÂ³	86.6 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
76.9	79.6	80.4

Power factor

50%	75%	100%
0.55	0.67	0.75

Frame	90S/L
Output	0.75 kW
Number of Poles	4
Frequency	60 Hz
Rated speed	1750 rpm
Slip	2.78 %
Rated voltage	460 V
Rated current	1.50 A
L. R. Amperes	11.1 A
LRC	7.4
No load current	0.968 A
Rated torque	3.02 ft.lb
Locked rotor torque	250 %
Breakdown torque	320 %
Locked rotor time	34s (cold) 19s (hot)

Moment of inertia (J)	0.0911 sq.ft.lb
Design	N
Insulation Class	F
Service factor	1.15
Temperature rise	80 K
Duty Cycle	S1
Starting Method	Direct On Line
Ambient temperature	-20Â°C to +40Â°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP56
Enclosure	IC411 - TEFC
Mounting	B3T
RotationÂ¹	Both (CW and CCW)
Noise levelÂ²	51.0 dB(A)
Approx. weightÂ³	86.6 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
77.0	81.5	82.5

Power factor

50%	75%	100%
0.54	0.66	0.76

Features

Frame Material	Cast Iron
Impregnation Method	Dip and Bake Polyester
Space Heater Voltage	200 - 240 V
Main terminal box hole	M25x1,5
Terminal Block	BMC - 6 pins
Shaft Locking Device	Without
Shaft Material	SAE 1040/45 Carbon Steel
Painting	RAL 5009 205P (ISO 12944 - C3)
Grounding Lugs	Double
Fan Cover material	Cast Iron
Tropicalized Painting	Without
Joints Seal	Lumomoly
Fan material	Aluminum
Bearing cap	Yes- Bearing Cap
Bolt Material	Carbon Steel
Winding thermal protection	Thermistor - 2 wires 1 per phase 150Â°C
Balancing Method	1/2 Key
Drip Cover	Without
Overload protector (phenolic)	Without overload protector