Motor/Control Division

Frame	315S/M
Output	125 HP
Number of Poles	8
Frequency	50 Hz
Rated speed	740 rpm
Slip	1.33 %
Rated voltage	380 V
Rated current	180 A
L. R. Amperes	1080 A
LRC	6.0
No load current	69.8 A
Rated torque	875 ft.lb
Locked rotor torque	180 %
Breakdown torque	210 %
Locked rotor time	72s (cold) 40s (hot)

Moment of inertia (J)	114 sq.ft.lb
Design	N
Insulation Class	F
Service factor	1.00
Temperature rise	80 K
Duty Cycle	S1
Starting Method	Direct On Line
Ambient temperature	-20Â°C to +40Â°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP55
Enclosure	IC411 - TEFC
Mounting	B3L(E)
RotationÂ¹	Both (CW and CCW)
Noise levelÂ²	62.0 dB(A)
Approx. weightÂ³	2764 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
93.0	93.5	94.0

Power factor

50%	75%	100%
0.69	0.77	0.81

Frame	315S/M
Output	125 HP
Number of Poles	8
Frequency	50 Hz
Rated speed	742 rpm
Slip	1.07 %
Rated voltage	400 V
Rated current	173 A
L. R. Amperes	1107 A
LRC	6.4
No load current	75.0 A
Rated torque	873 ft.lb
Locked rotor torque	210 %
Breakdown torque	240 %
Locked rotor time	72s (cold) 40s (hot)

Moment of inertia (J)	114 sq.ft.lb
Design	N
Insulation Class	F
Service factor	1.00
Temperature rise	80 K
Duty Cycle	S1
Starting Method	Direct On Line
Ambient temperature	-20Â°C to +40Â°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP55
Enclosure	IC411 - TEFC
Mounting	B3L(E)
RotationÂ¹	Both (CW and CCW)
Noise levelÂ²	62.0 dB(A)
Approx. weightÂ³	2764 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
93.0	93.5	94.0

Power factor

50%	75%	100%
0.65	0.75	0.80

Frame	315S/M
Output	125 HP
Number of Poles	8
Frequency	50 Hz
Rated speed	743 rpm
Slip	0.93 %
Rated voltage	415 V
Rated current	169 A
L. R. Amperes	1149 A
LRC	6.8
No load current	78.0 A
Rated torque	872 ft.lb
Locked rotor torque	229 %
Breakdown torque	260 %
Locked rotor time	72s (cold) 40s (hot)

Moment of inertia (J)	114 sq.ft.lb
Design	N
Insulation Class	F
Service factor	1.00
Temperature rise	80 K
Duty Cycle	S1
Starting Method	Direct On Line
Ambient temperature	-20Â°C to +40Â°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP55
Enclosure	IC411 - TEFC
Mounting	B3L(E)
RotationÂ¹	Both (CW and CCW)
Noise levelÂ²	62.0 dB(A)
Approx. weightÂ³	2764 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
93.0	93.5	94.0

Power factor

50%	75%	100%
0.62	0.73	0.79

Frame	315S/M
Output	125 HP
Number of Poles	8
Frequency	60 Hz
Rated speed	894 rpm
Slip	0.67 %
Rated voltage	460 V
Rated current	153 A
L. R. Amperes	1071 A
LRC	7.0
No load current	70.9 A
Rated torque	724 ft.lb
Locked rotor torque	220 %
Breakdown torque	260 %
Locked rotor time	99s (cold) 55s (hot)

Moment of inertia (J)	114 sq.ft.lb
Design	N
Insulation Class	F
Service factor	1.25
Temperature rise	80 K
Duty Cycle	S1
Starting Method	Direct On Line
Ambient temperature	-20Â°C to +40Â°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP55
Enclosure	IC411 - TEFC
Mounting	B3L(E)
RotationÂ¹	Both (CW and CCW)
Noise levelÂ²	66.0 dB(A)
Approx. weightÂ³	2764 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
93.5	94.0	94.5

Power factor

50%	75%	100%
0.61	0.73	0.78

Features

Frame Material	Cast Iron
Impregnation Method	Constant Resin Flow
Regreasing System	At Drive end and Non-drive end
Main terminal box hole	2xM63x1,5
Terminal Block	BMC - 6 pins
Shaft Locking Device	Without
Drain	Rubber, automatic
Shaft Material	SAE 1040/45 Carbon Steel
Painting	RAL 5009 203A (ISO 12944 - C2)
Grounding Lugs	Double
Fan Cover material	Cast Iron
Tropicalized Painting	Without
Fan material	Plastic
Bearing cap	Yes- Bearing Cap
Balancing Method	1/2 Key
Drip Cover	Without
Overload protector (phenolic)	Without overload protector