Motor/Control Division

Frame	315S/M
Output	125 HP
Number of Poles	6
Frequency	50 Hz
Rated speed	991 rpm
Slip	0.90 %
Rated voltage	380 V
Rated current	170 A
L. R. Amperes	1139 A
LRC	6.7
No load current	65.0 A
Rated torque	653 ft.lb
Locked rotor torque	190 %
Breakdown torque	220 %
Locked rotor time	61s (cold) 34s (hot)

Moment of inertia (J)	94.8 sq.ft.lb
Design	N
Insulation Class	F
Service factor	1.00
Temperature rise	80 K
Duty Cycle	S1
Starting Method	Direct On Line
Ambient temperature	-20Â°C to +40Â°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP55
Enclosure	IC411 - TEFC
Mounting	B3L(E)
RotationÂ¹	Both (CW and CCW)
Noise levelÂ²	67.0 dB(A)
Approx. weightÂ³	2521 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
95.4	95.8	95.9

Power factor

50%	75%	100%
0.71	0.80	0.84

Frame	315S/M
Output	125 HP
Number of Poles	6
Frequency	50 Hz
Rated speed	992 rpm
Slip	0.80 %
Rated voltage	400 V
Rated current	163 A
L. R. Amperes	1092 A
LRC	6.7
No load current	70.0 A
Rated torque	653 ft.lb
Locked rotor torque	220 %
Breakdown torque	250 %
Locked rotor time	61s (cold) 34s (hot)

Moment of inertia (J)	94.8 sq.ft.lb
Design	N
Insulation Class	F
Service factor	1.00
Temperature rise	80 K
Duty Cycle	S1
Starting Method	Direct On Line
Ambient temperature	-20Â°C to +40Â°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP55
Enclosure	IC411 - TEFC
Mounting	B3L(E)
RotationÂ¹	Both (CW and CCW)
Noise levelÂ²	67.0 dB(A)
Approx. weightÂ³	2521 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
95.3	95.8	96.1

Power factor

50%	75%	100%
0.67	0.78	0.83

Frame	315S/M
Output	125 HP
Number of Poles	6
Frequency	50 Hz
Rated speed	993 rpm
Slip	0.70 %
Rated voltage	415 V
Rated current	159 A
L. R. Amperes	1113 A
LRC	7.0
No load current	73.5 A
Rated torque	652 ft.lb
Locked rotor torque	240 %
Breakdown torque	270 %
Locked rotor time	61s (cold) 34s (hot)

Moment of inertia (J)	94.8 sq.ft.lb
Design	N
Insulation Class	F
Service factor	1.00
Temperature rise	80 K
Duty Cycle	S1
Starting Method	Direct On Line
Ambient temperature	-20Â°C to +40Â°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP55
Enclosure	IC411 - TEFC
Mounting	B3L(E)
RotationÂ¹	Both (CW and CCW)
Noise levelÂ²	67.0 dB(A)
Approx. weightÂ³	2521 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
95.2	95.8	96.2

Power factor

50%	75%	100%
0.64	0.76	0.82

Frame	315S/M
Output	125 HP
Number of Poles	6
Frequency	60 Hz
Rated speed	1194 rpm
Slip	0.50 %
Rated voltage	460 V
Rated current	146 A
L. R. Amperes	1022 A
LRC	7.0
No load current	65.0 A
Rated torque	542 ft.lb
Locked rotor torque	260 %
Breakdown torque	310 %
Locked rotor time	109s (cold) 61s (hot)

Moment of inertia (J)	94.8 sq.ft.lb
Design	N
Insulation Class	F
Service factor	1.25
Temperature rise	80 K
Duty Cycle	S1
Starting Method	Direct On Line
Ambient temperature	-20Â°C to +40Â°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP55
Enclosure	IC411 - TEFC
Mounting	B3L(E)
RotationÂ¹	Both (CW and CCW)
Noise levelÂ²	70.0 dB(A)
Approx. weightÂ³	2521 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
94.5	95.4	95.4

Power factor

50%	75%	100%
0.64	0.75	0.81

Features

Frame Material	Cast Iron
Impregnation Method	Constant Resin Flow
Regreasing System	At Drive end and Non-drive end
Main terminal box hole	2xM63x1,5
Terminal Block	BMC - 6 pins
Shaft Locking Device	Without
Drain	Rubber, automatic
Shaft Material	SAE 1040/45 Carbon Steel
Painting	RAL 5009 203A (ISO 12944 - C2)
Grounding Lugs	Double
Fan Cover material	Cast Iron
Tropicalized Painting	Without
Fan material	Plastic
Bearing cap	Yes- Bearing Cap
Balancing Method	1/2 Key
Drip Cover	Without
Overload protector (phenolic)	Without overload protector