Motor/Control Division

717.336.2949

M-F from 7:30am to 5:00pm

Power Tool Division

717.354.6141

M-F from 7:00am to 5:00pm

Sign In

My
Account

My Cart
Menu
/Products/Electric Motors/3 Phase Metric/WEG/Foot Mount, W22/.3712EP3EAL80-W22 WEG 0.5HP/0.37kW IEC TRU-Metric Electric Motor, 1200RPM
.3712EP3EAL80-W22 WEG 0.5HP/0.37kW IEC TRU-Metric Electric Motor, 1200RPM
Enlarge Photo

Product ID: .3712EP3EAL80-W22

.3712EP3EAL80-W22 WEG 0.5HP/0.37kW IEC TRU-Metric Electric Motor, 1200RPM

MFG: WEG Electric Corporation
MFG Part Number: .3712EP3EAL80-W22

Selected accessories will also be added to cart
$283.50 / Each
Quantity:
IC411-TEFC, IP55, 80 Frame, 230/460/380-415VAC 3-Phase 50/60Hz, 13958123, Foot Mount, Multimounting, High Efficiency, Aluminum Frame, 19mm Keyed Shaft

Electric Motors

Frame 80
Output 0.5 HP (0.37 kW)
Number of Poles 6
Frequency 60 Hz
Rated speed 1145 rpm
Slip 4.58 %
Rated voltage 230/460 V
Rated current 2.14/1.07 A
L. R. Amperes 10.7/5.35 A
LRC 5.0
No load current 1.52/0.760 A
Rated torque 2.26 ft.lb
Locked rotor torque 270 %
Breakdown torque 300 %
Locked rotor time 28s (cold) 16s (hot)
Design N
Insulation Class F
Service factor 1.15
Temperature rise 80 K
Duty Cycle S1
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting B3L(E)
Rotation¹ Both (CW and CCW)
Noise level² 47.0 dB(A)
Approx. weight³ 25.9 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
57.0  63.0  64.0 

Power factor

50% 75% 100%
0.48  0.60  0.68 
Frame 80
Output 0.5 HP (0.37 kW)
Number of Poles 6
Frequency 50 Hz
Rated speed 920 rpm
Slip 8.00 %
Rated voltage 380 V
Rated current 1.16 A
L. R. Amperes 4.87 A
LRC 4.2
No load current 0.750 A
Rated torque 2.82 ft.lb
Locked rotor torque 190 %
Breakdown torque 200 %
Locked rotor time 28s (cold) 16s (hot)
Design N
Insulation Class F
Service factor 1.00
Temperature rise 80 K
Duty Cycle S1
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting B3L(E)
Rotation¹ Both (CW and CCW)
Noise level² 43.0 dB(A)
Approx. weight³ 25.9 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
64.0  68.5  70.0 

Power factor

50% 75% 100%
0.48  0.63  0.69 
Frame 80
Output 0.5 HP (0.37 kW)
Number of Poles 6
Frequency 50 Hz
Rated speed 940 rpm
Slip 6.00 %
Rated voltage 415 V
Rated current 1.19 A
L. R. Amperes 5.47 A
LRC 4.6
No load current 0.950 A
Rated torque 2.76 ft.lb
Locked rotor torque 240 %
Breakdown torque 250 %
Locked rotor time 28s (cold) 16s (hot)
Design N
Insulation Class F
Service factor 1.00
Temperature rise 80 K
Duty Cycle S1
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting B3L(E)
Rotation¹ Both (CW and CCW)
Noise level² 43.0 dB(A)
Approx. weight³ 25.9 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
61.0  67.0  70.0 

Power factor

50% 75% 100%
0.40  0.58  0.62 

Features

Frame Material Aluminum 
Impregnation Method Dip and Bake Polyester 
Main terminal box hole NPT 3/4" 
Terminal Block BMC - 6 pins 
Drain Rubber, automatic 
Shaft Material SAE 1040/45 Carbon Steel 
Painting RAL 7022 207A (ISO 12944 - C2) 
Grounding Lugs Single 
Fan Cover material Steel 
Tropicalized Painting Without 
Fan material Plastic 
Bearing cap No-Without Bearing Cap 
Balancing Method 1/2 Key 
Drip Cover Without 
Overload protector (phenolic) Without overload protector