Motor/Control Division

Frame	E56
Output	0.550 kW (0.75 HP)
Number of Poles	6/4
Frequency	60 Hz
Rated speed	1725 rpm
Slip	4.17 %
Rated voltage	115 V
Rated current	10.3 A
L. R. Amperes	35.0 A
LRC	3.4x(Code F)
No load current	7.80 A
Rated torque	2.25 ft.lb
Locked rotor torque	110 %
Breakdown torque	229 %
Locked rotor time	10s (cold) 6s (hot)

Moment of inertia (J)	0.0890 sq.ft.lb
Insulation Class	B
Service factor	1.00
Temperature rise	80 K
Duty Cycle	Cont.(S1)
Starting Method	Direct On Line
Ambient temperature	-20°C to +40°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP21
Enclosure	IC01 - ODP
Mounting	F-1
Rotation¹	CW
Noise level²	46.0 dB(A)
Approx. weight³	24.3 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
54.5	61.0	61.1

Power factor

50%	75%	100%
0.54	0.66	0.75

Frame	E56
Output	0.18 kW (0.25 HP)
Number of Poles	6/4
Frequency	60 Hz
Rated speed	1140 rpm
Slip	5.00 %
Rated voltage	115 V
Rated current	5.10 A
L. R. Amperes	0.000 A
LRC	0.0x(Code A)
No load current	4.95 A
Rated torque	1.11 ft.lb
Locked rotor torque	0 %
Breakdown torque	260 %
Locked rotor time	10s (cold) 6s (hot)

Moment of inertia (J)	0.0890 sq.ft.lb
Insulation Class	B
Service factor	1.00
Temperature rise	80 K
Duty Cycle	Cont.(S1)
Starting Method	Direct On Line
Ambient temperature	-20°C to +40°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP21
Enclosure	IC01 - ODP
Mounting	F-1
Rotation¹	CW
Noise level²	42.0 dB(A)
Approx. weight³	24.3 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
32.1	39.8	42.9

Power factor

50%	75%	100%
0.51	0.61	0.70

Features

Frame Material	Rolled Steel
Impregnation Method	Dip and Bake Polyester
Shaft Locking Device	Without
Shaft Material	SAE 1040/45 Carbon Steel
Painting	Only primer
Grounding Lugs	Single
Fan Cover material	Without Fan Cover
Tropicalized Painting	Without
Fan material	Without fan
Bearing cap	No-Without Bearing Cap
Winding thermal protection	Thermostat - 2 wires 1 per phase 130°C
Balancing Method	Not Balanced
Drip Cover	Without
Resilient Base	Without
Overload protector (phenolic)	Without overload protector