717.336.2949

M-F from 7:30am to 5:00pm

717.354.6141

M-F from 7:00am to 5:00pm

My Cart

/Products/Electric Motors/3 Phase Explosion Proof/WEG/C-Face, Footless/00518XT3ER184TC WEG 5HP Explosion Proof Electric Motor, 1800RPM

Product ID: 00518XT3ER184TC

00518XT3ER184TC WEG 5HP Explosion Proof Electric Motor, 1800RPM

MFG: WEG Electric Corporation
MFG Part Number: 00518XT3ER184TC

Selected accessories will also be added to cart

$1,056.75 / Each

Quantity:

IC411 - TEFC, 182TC/184TC Frame, 208-230/460VAC 3-Phase 60Hz, C-Face, Footless, 14276569, NEMA Premium Efficiency

Details
Purchase Components

WEG Explosion-proof motor was especially designed to operate in environments with the presence of explosive atmospheres. It has robust construction, a flame retention system with gaps between the parts carefully designed, accurate machining on the terminal box and screws with high mechanical strength. It meets the requirements of explosive atmospheres like Division I/Zone 1. All ratings meet NEMA Premium Efficiency. Motors are certified for VFD service.

Product features

Standard	NEMA MG-1
Frequency	60 Hz
Voltage	208-230/460 V
Number of poles	4
Degree of Protection	IP55
Synchronous speed	1800 rpm

Output rating	5 HP
Mounting	Footless
Flange	C
Mounting	W-6
Terminal box¹	Left position
Enclosure	IC411 - TEFC

Frame	182/4TC
Output	5 HP (3.7 kW)
Number of Poles	4
Frequency	60 Hz
Rated speed	1750 rpm
Slip	2.78 %
Rated voltage	208-230/460 V
Rated current	14.5-13.1/6.57 A
L. R. Amperes	103-93.3/46.6 A
LRC	7.1x(Code J)
No load current	5.35-6.20/3.10 A
Rated torque	14.8 ft.lb
Locked rotor torque	250 %
Breakdown torque	330 %
Locked rotor time	30s (cold) 17s (hot)

Moment of inertia (J)	0.3695 sq.ft.lb
Design	B
Insulation Class	F
Service factor	1.15
Temperature rise	80 K
Duty Cycle	Cont.(S1)
Starting Method	Direct On Line
Ambient temperature	-20°C to +40°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP55
Enclosure	IC411 - TEFC
Mounting	W-6
Rotation¹	Both (CW and CCW)
Noise level²	56.0 dB(A)
Approx. weight³	132 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.